1. Job Title: Design Engineer II- Mechanical
Fluor Mideast Limited (FML), Abu Dhabi is a subsidiary of Fluor Corporation, one of the World’s largest, publicly traded engineering, procurement, construction, maintenance and project management companies. Consistently rated as one of the world’s safest contractors, we design, build and maintain the world’s most complex and challenging capital projects.
Overall Purpose of Job:
Under Direct Supervision, using independent judgment within established practices and guidelines, by Management of Fluor or its subsidiaries (indicated as “the Company”), the purpose of this position is to provide the essential administrative and technical knowledge and direction for the job functions listed below with the objective of ensuring Fluor’s competitiveness within the global marketplace by delivering quality services of unmatched value.
Primary Job Duties/Functions:
1.Serves as Lead or Area Lead on assigned projects or moderately complex engineering assignments and develops the most cost-effective total project solution for execution of the discipline engineering work. Lead duties include but are not limited to: develops and updates job plans, supports proposal and estimate activities, develops and reviews specifications including design criteria, develops and monitors schedules, develops and monitors manpower estimate forecasts, assigns work to teams, monitors material estimates and quantities, interfaces with project disciplines / client representatives /construction, participates in equipment and material procurement activities, permitting activities and subcontracting activities
2.Perform and check design calculations and drawings, prepare equipment datasheets, requisitions, carry out technical bid evaluations and review vendor documents.
3.Reviews specifications, drawings, and vendor equipment documentation from both within the discipline as well as from other disciplines for compliance with project requirements and actively seeks resolution
4.Uses good knowledge of major industry Codes and Standards (e.g., ASME, API, PD etc.) applicable to Pressure Equipment.
5.Provides close interface with, and promotes the understanding of, other discipline functions
6.Other related duties/functions as assigned
7.Familiarity with software for design and stress calculations.
1. An accredited Bachelors degree, or equivalent, in Mechanical Engineering
2. 10 years of design experience working with an Engineering Construction Company supporting Energy and Chemical projects.
3. The use of Mechanical Specific software.
4. Knowledge of major industry Codes and Standards (e.g., ASME, API, PD, etc.)
|Preferred Qualifications||1.Experience in rotating equipment and static equipment.|
|City (or Nearest City)||Abu Dhabi|
|Country||United Arab Emirates|
To apply : send us you CV at email@example.com and mention the requisition number.
2. Job Title : Senior Interior Designer
Exp: 12 – 25 yrs. | Opening(s): 1
Education:Basic – Bachelor of Technology/Engineering, Bachelor of Science
Review the contract documents (drawings and specification related to his discipline) and advises the Construction Manager of any deficiency.
Review Contractor’s submittals, related to his discipline, and ensure its compliance with concept design, contract requirements and properly coordinated with other disciplines.
Review shop drawings, related to his discipline, and ensure its compliance with designrequirements, contact requirements, properly coordinated with other disciplines and submitted as per the approved schedules.
Review and approval of Materials, related to his discipline, ensuring compliance with contract requirements and submitted as per approved Project Construction schedule. Any deviation from project specification shall be notified to the Construction Manager vide Material Approval Request (MAR) Verification form.
Regular visits to Project site to ensure quality of work is in compliance with contact requirements, good construction practice, only approved materials are used, compliance with shop drawings, and report any deviations to Construction Manager.
Make sure that CONTRACTOR has submitted the Method Statement (MS), Quality Control Procedure (QCP) and inspection & Test Plan (11?) prior to stating the relevant activity. Inspection & Test Plans and other Quality Verification Forms address all necessary information outlined in the project specification or in the Manufacturer recommendations.
Review and approval of Method Statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) as submitted by Contractor and ensure its compliance with all contract requirements.
Coordinate with COMPANY Senior QA Engineer to establish the intervention point in the proposed Inspection and Test Plan.
Participate in reviewing Field Design Changes, related to his discipline, as submitted by Contractor by giving the technical position addressing any foreseen cost and Time Impact.
Technical support and assessment to Contracts Engineer and Cost Engineer of Trend Notices, approved variations and claims (when raised by Contractor).
Advise PMT Quality and Safety Engineers as well as Construction Manager of noticed non-compliance cases during site visits.
Regular spot checks of material delivered to site, related to his discipline, and direct the relevant Inspector! Engineer to continue inspection of stored materials on site to ensure it is as per approved materials and in good condition.
Closely monitor inspector/engineer performance and advises the Construction Manager in case of deficiency or poor performance.
Technical support to PMT Planning Engineer in respect to precedence of activities related to his discipline and optimum duration of each activity.
Attend Technical Meetings with Contractor, and Weekly Progress Meetings if required by Construction Manager.
Ensure fun coordination between all other disciplines / Trades has been carried out for all External and Internal MEP services.
Review spare parts, operation & mainten2nce manuals of trades related to his discipline and ensure compliance with contract requirements.
Participate with PMC disciplines in reviewing the Close Out Report as submitted by CONTRACTOR.
Review As-Built drawings related to his discipline as submitted by Contractor. As built drawing shall be properly coordinated with the site Inspection Team to make sure that it matches all site changes.
Witness pre commissioning & commissioning activities related to his discipline and ensure full compliance with project requirements.
Make sure that any non-conformity has been reported through a Non Conformance Report (NCR). All NCRs shall be coordinated with the PMT Senior Quality Assurance Engineer.
Desired Candidate Profile
Should be qualified Engineer / Architect B. Sc. or higher. The senior discipline should have a minimum of 10 years experience in Engineering functions out of a minimum of 15 years overall experience in Construction fields
Keyword: Interior Design, Construction, Site Supervision, Fitout, Finishing
To apply send us your CV to firstname.lastname@example.org and mention ref: HILLS
3. Job Title: Senior Structural Design Incharge
Client of Dulsco – U.A.E.
Posted: May 8, 2013Exp: 7 – 14 yrs. | Salary: $4001 – $5000 | Opening(s): 1
Education:Basic – Bachelor of Technology/Engineering(Civil)
Functional Area: Engineering
Mandatory: Dubai Municipality license for G+12/ Unlimited
Bachelor degree in civil.
Must have overall 10 years of experience.
AutoCAD. Structural Analysis and Design software (e.g. ETABS, SAFE, STAAD,7etc).
Familiar with Local and International Codes of Practice for Structural design.
Demonstrated ability to manage multiple projects. Ability to meet stated customer initiated deadlines.
Must be goal orientated.
Ability to multi task
Must have good organizational skills
Must be proactive and energetic
Must be flexible and creative
Keyword: design engineer, structural, civil
To apply send us CV at email@example.com and mention quote reference: DULSCO
4. Job Title: Inspection Engineer
Exp: 7 – 14 yrs. | Opening(s): 6
Education:Basic – Bachelor of Technology/Engineering
The Inspection Section is responsible for carrying out all inspections activities required to ensure plant integrity and reliability for the safe and efficient operation and maintenance of the plant based on RBI methods.
Responsible to inspect plant process equipment, maintenance and capital investment works, and materials received in the warehouse when required, to ensure compliance with codes, standards and specifications.
Handles contractors ranging from highly specialized to labors, depending on relevant inspection tasks, during Major Maintenance and/or Extraordinary Maintenance projects or other specific activities.
· To supervise all on-stream and shutdown inspection activities for stationary equipment, pressure relieving devices, corrosion monitoring and investigation of failures.
· To identify areas of concern and propose dedicated inspection procedures to follow-up their resolution to improve Plants Integrity.
· To prepare data to implement and updates the Risk Based Inspection (RBI) methodology to enhance Plants Integrity and Reliability in order to optimize inspection frequencies, maintenance cost and Plants Availability.
· To assist the Inspection Section Head to prepare long and short-term inspection Business Plans and Budgets.
· To comply with all company Health, Safety and Environment as well as Work Permit, policies and procedures
· To advise on repair techniques, materials selection, welding procedures, inspection and testing requirements.
· To supervise and participates in non-destructive testing of equipment and piping, including review of preliminary interpretations carried out by subordinates.
Keyword: inspection, inspection engineer
To apply send us CV at firstname.lastname@example.org and mention quote reference: GASCO
Hot job of the day
5. Job Title: Senior Inspection Planning Engineer.
Exp: 8 – 15 yrs. | Opening(s): 1
Education:Basic – Bachelor of Technology/Engineering(Mechanical, Metallurgy)
An exciting opportunity with an established leading Middle East based National Oil Company, that functions throughout onshore development sites as well as in the shallow coastal waters with a number of productive oil fields.
JOB PURPOSE & SCOPE:
1. Implement Corrosion Control/Inspection programs, involving pre-commissioning/live equipment inspection. Recommend corrective action.
2. Define fitness for purpose and conformity to specifications
3. Provide input to shutdown planning.
4. Review and conduct surveys to ensure equipment and
An attractive remuneration will be negotiated with the successful candidates and will be in line with a competitive industry standard.
QUALIFICATION & EXPERIENCE REQUIRED:
Bachelor’s Degree in Mechanical or Metallurgical Engineering
Min relevant Experience of 7 to 10 years in upstream oil and gas
Keyword: Inspection, Corrosion, Planning
To apply send us CV at email@example.com and mention quote reference: Fuschia Oil & Gas
To receive more updates of jobs please register with us at firstname.lastname@example.org