Call for Resumes – Top 20 Jobs week 1

1. Job Title: Design Engineer II-  Mechanical 

    Job Description: 

Fluor Mideast Limited (FML), Abu Dhabi is a subsidiary of Fluor Corporation, one of the World’s largest, publicly traded engineering, procurement, construction, maintenance and project management companies. Consistently rated as one of the world’s safest contractors, we design, build and maintain the world’s most complex and challenging capital projects.

Overall Purpose of Job:
Under Direct Supervision, using independent judgment within established practices and guidelines, by Management of Fluor or its subsidiaries (indicated as “the Company”), the purpose of this position is to provide the essential administrative and technical knowledge and direction for the job functions listed below with the objective of ensuring Fluor’s competitiveness within the global marketplace by delivering quality services of unmatched value.

Primary Job Duties/Functions:
1.Serves as Lead or Area Lead on assigned projects or moderately complex engineering assignments and develops the most cost-effective total project solution for execution of the discipline engineering work. Lead duties include but are not limited to: develops and updates job plans, supports proposal and estimate activities, develops and reviews specifications including design criteria, develops and monitors schedules, develops and monitors manpower estimate forecasts, assigns work to teams, monitors material estimates and quantities, interfaces with project disciplines / client representatives /construction, participates in equipment and material procurement activities, permitting activities and subcontracting activities
2.Perform and check design calculations and drawings, prepare equipment datasheets, requisitions, carry out technical bid evaluations and review vendor documents.
3.Reviews specifications, drawings, and vendor equipment documentation from both within the discipline as well as from other disciplines for compliance with project requirements and actively seeks resolution
4.Uses good knowledge of major industry Codes and Standards (e.g., ASME, API, PD etc.) applicable to Pressure Equipment.
5.Provides close interface with, and promotes the understanding of, other discipline functions
6.Other related duties/functions as assigned
7.Familiarity with software for design and stress calculations.

Job Requirements. 

1. An accredited Bachelors degree, or equivalent, in Mechanical Engineering
2. 10 years of design experience working with an Engineering Construction Company supporting Energy and Chemical projects.
3. The use of Mechanical Specific software.
4. Knowledge of major industry Codes and Standards (e.g., ASME, API, PD, etc.)

Preferred Qualifications 1.Experience in rotating equipment and static equipment.
Degree Required Yes
City (or Nearest City) Abu Dhabi
State/Province Abu Dhabi
Country United Arab Emirates
Location Type Office
Requisition Number 55211BR

To apply : send us you CV  at lebs.client@gmx.fr and mention the requisition number.

2. Job Title : Senior Interior Designer

Exp: 12 – 25 yrs. | Opening(s): 1

Education:Basic – Bachelor of Technology/Engineering, Bachelor of Science

Nationality:Any Nationality 

Job Description: 

Review the contract documents (drawings and specification related to his discipline) and advises the Construction Manager of any deficiency.
Review Contractor’s submittals, related to his discipline, and ensure its compliance with concept design, contract requirements and properly coordinated with other disciplines.
Review shop drawings, related to his discipline, and ensure its compliance with designrequirements, contact requirements, properly coordinated with other disciplines and submitted as per the approved schedules.
Review and approval of Materials, related to his discipline, ensuring compliance with contract requirements and submitted as per approved Project Construction schedule. Any deviation from project specification shall be notified to the Construction Manager vide Material Approval Request (MAR) Verification form.
Regular visits to Project site to ensure quality of work is in compliance with contact requirements, good construction practice, only approved materials are used, compliance with shop drawings, and report any deviations to Construction Manager.
Make sure that CONTRACTOR has submitted the Method Statement (MS), Quality Control Procedure (QCP) and inspection & Test Plan (11?) prior to stating the relevant activity. Inspection & Test Plans and other Quality Verification Forms address all necessary information outlined in the project specification or in the Manufacturer recommendations.
Review and approval of Method Statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) as submitted by Contractor and ensure its compliance with all contract requirements.
Coordinate with COMPANY Senior QA Engineer to establish the intervention point in the proposed Inspection and Test Plan.
Participate in reviewing Field Design Changes, related to his discipline, as submitted by Contractor by giving the technical position addressing any foreseen cost and Time Impact.
Technical support and assessment to Contracts Engineer and Cost Engineer of Trend Notices, approved variations and claims (when raised by Contractor).
Advise PMT Quality and Safety Engineers as well as Construction Manager of noticed non-compliance cases during site visits.
Regular spot checks of material delivered to site, related to his discipline, and direct the relevant Inspector! Engineer to continue inspection of stored materials on site to ensure it is as per approved materials and in good condition.
Closely monitor inspector/engineer performance and advises the Construction Manager in case of deficiency or poor performance.
Technical support to PMT Planning Engineer in respect to precedence of activities related to his discipline and optimum duration of each activity.
Attend Technical Meetings with Contractor, and Weekly Progress Meetings if required by Construction Manager.
Ensure fun coordination between all other disciplines / Trades has been carried out for all External and Internal MEP services.
Review spare parts, operation & mainten2nce manuals of trades related to his discipline and ensure compliance with contract requirements.
Participate with PMC disciplines in reviewing the Close Out Report as submitted by CONTRACTOR.
Review As-Built drawings related to his discipline as submitted by Contractor. As built drawing shall be properly coordinated with the site Inspection Team to make sure that it matches all site changes.
Witness pre commissioning & commissioning activities related to his discipline and ensure full compliance with project requirements.
Make sure that any non-conformity has been reported through a Non Conformance Report (NCR). All NCRs shall be coordinated with the PMT Senior Quality Assurance Engineer.

Desired Candidate Profile

Should be qualified Engineer / Architect B. Sc. or higher. The senior discipline should have a minimum of 10 years experience in Engineering functions out of a minimum of 15 years overall experience in Construction fields

Keyword: Interior Design, Construction, Site Supervision, Fitout, Finishing

To apply send us your CV to lebs.client@gmx.fr and mention ref: HILLS

3. Job Title: Senior Structural Design Incharge

Client of Dulsco – U.A.E. 

Posted: May 8, 2013Exp: 7 – 14 yrs. | Salary: $4001 – $5000 | Opening(s): 1

Education:Basic – Bachelor of Technology/Engineering(Civil)

Nationality:Any Nationality

Industry Type: Construction

Functional Area: Engineering

Job Description: 

Mandatory: Dubai Municipality license for G+12/ Unlimited

Bachelor degree in civil.
 Must have overall 10 years of experience.
 AutoCAD. Structural Analysis and Design software (e.g. ETABS, SAFE, STAAD,7etc).
 Familiar with Local and International Codes of Practice for Structural design.
 Demonstrated ability to manage multiple projects. Ability to meet stated customer initiated deadlines.
 Must be goal orientated.
 Ability to multi task
 Must have good organizational skills
 Must be proactive and energetic
 Must be flexible and creative

Keyword: design engineer, structural, civil

To apply send us CV at lebs.client@gmx.fr and mention quote reference: DULSCO 

4. Job Title: Inspection Engineer

Exp: 7 – 14 yrs. | Opening(s): 6

Education:Basic – Bachelor of Technology/Engineering

Nationality:Any Nationality

Industry Type: Oil & Gas/ Petroleum 

Functional Area: Engineering

Job Description:

The Inspection Section is responsible for carrying out all inspections activities required to ensure plant integrity and reliability for the safe and efficient operation and maintenance of the plant based on RBI methods.

Responsible to inspect plant process equipment, maintenance and capital investment works, and materials received in the warehouse when required, to ensure compliance with codes, standards and specifications.

Handles contractors ranging from highly specialized to labors, depending on relevant inspection tasks, during Major Maintenance and/or Extraordinary Maintenance projects or other specific activities.

MAIN ACCOUNTABILITIES

· To supervise all on-stream and shutdown inspection activities for stationary equipment, pressure relieving devices, corrosion monitoring and investigation of failures.
· To identify areas of concern and propose dedicated inspection procedures to follow-up their resolution to improve Plants Integrity.
· To prepare data to implement and updates the Risk Based Inspection (RBI) methodology to enhance Plants Integrity and Reliability in order to optimize inspection frequencies, maintenance cost and Plants Availability.
· To assist the Inspection Section Head to prepare long and short-term inspection Business Plans and Budgets.
· To comply with all company Health, Safety and Environment as well as Work Permit, policies and procedures
· To advise on repair techniques, materials selection, welding procedures, inspection and testing requirements.
· To supervise and participates in non-destructive testing of equipment and piping, including review of preliminary interpretations carried out by subordinates.

Keyword: inspection, inspection engineer

To apply send us CV at lebs.client@gmx.fr and mention quote reference: GASCO 

Hot job of the day 

5. Job Title: Senior Inspection Planning Engineer.

Exp: 8 – 15 yrs. | Opening(s): 1

Education:Basic – Bachelor of Technology/Engineering(Mechanical, Metallurgy)

Nationality:Any Nationality

Industry Type: Oil & Gas / Petroleum 

Functional Area: Engineering

Job Description: 

ABOUT CLIENT:
An exciting opportunity with an established leading Middle East based National Oil Company, that functions throughout onshore development sites as well as in the shallow coastal waters with a number of productive oil fields.

JOB PURPOSE & SCOPE:
1. Implement Corrosion Control/Inspection programs, involving pre-commissioning/live equipment inspection. Recommend corrective action.

2. Define fitness for purpose and conformity to specifications

3. Provide input to shutdown planning.

4. Review and conduct surveys to ensure equipment and
plant integrity.

REMUNERATION:
An attractive remuneration will be negotiated with the successful candidates and will be in line with a competitive industry standard.

Desired Candidate: 

QUALIFICATION & EXPERIENCE REQUIRED:
Bachelor’s Degree in Mechanical or Metallurgical Engineering

EXPERIENCE REQUIRED:
Min relevant Experience of 7 to 10 years in upstream oil and gas

Keyword: Inspection, Corrosion, Planning

To apply send us CV at lebs.client@gmx.fr and mention quote reference: Fuschia Oil & Gas 

To receive more updates of jobs please register with us at lebs.client@gmx.fr 

Advertisements

One thought on “Call for Resumes – Top 20 Jobs week 1

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s